Red/GreenTraffic Baton Compact Safety Switch
NEW MODEL See demo
Red and green flashing traffic wand with two button on/off action and pressure safety switch.
Ideal for banksmen this has Red/Green LED's and has a two button operation so the unit can continually be cycled through red/green signalling modes until the unit is powered off.
Once powered on the unit comes on in a Red solid light mode, press and hold down the pressure on the the button to operate the Green solid light mode, release to instantly turn back to red and repeat as required.
The wand also has a useful torch only function in the nose cone.
The banksman simply releases pressure on the switch to revert back to a red STOP signal which also helps if they stumble, fall or drop the wand - .a simple concept which we believe is a great contribution to safety particularly around heavy plant or large vehicles in bays or on construction sites where surfaces are often uneven and driver visibility may be restricted.
Superbly compact, the 18 high output red and green LED's are highly visible and we believe you will be truly amazed by the performance of this light wand.
In sequence the traffic wand with its twin button operation:-
- Button 1 - Red solid light output
- Button 2- Green solid light output when pressure maintained on button
- Release Button 2 - Red solid light when button released
- Button 2 - Torch feature
Its translucent light sleeve measures just under 15cm with a handle of 13cm giving a combined length of just under 28cms and a circumference of less than 3cm's
It uses 3 x AAA batteries rather than AA batteries used in other models and weighs in at just 132gms with batteries inserted.
Thanks to the high specification red and green LED's used in this wand it is as bright as any within our range however as a consequence of high output LED's and smaller batteries the operational runtime, subject to battery quality, is approximately 8-12 hours.
The wand has has a magnetic base allowing deployment on metallic surfaces with the magnet being strong enough to support the wand vertically. (Note that this wand is not compatible with our tripod stand).obviously when used in standalone mode it only produces a red light output.
This light wand is compact enough to be comfortably attached to Hi-Viz jackets using the Klickfast range of carrier systems, it then provides a highly effective personal safety light which can quickly be unattached and deployed in its role as a hand held marshalling wand.
Made from ABS and polycarbonate, its small size and light weight construction also contribute to making the light robust, the reduced weight making it less prone to damage if dropped and the narrow circumference adding more rigidity to the overall design.
Although very compact, having such a large number of LED's makes them highly visible and when tested by the RAF were discernable at 800m (subject to ambient light conditions).
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: